AUTOMATIC BOXERS, 'BOXER' II and I
1 to 4 STREAMS, IN-LINE FILLER of LID- and BOTTOM BOXES
for BATCHES of 5 to 200 SHEETS, 10x15cm, 4"x6", A4, U4, 11"x17".
The 'BOXER', the in-line boxing unit for Automation-Stackers is also available as
stand-alone machine for manual feeding of batches or packs.
The 'BOXER' is made to bring the batches of sheets into prefabricated lid-and-bottom
boxes. The batches can have a height of 2 mm (0.08") to 20 mm (0.8") and are boxed
in 1, 2 streams for A4 and U4, in 4 streams for 10x15cm or 4x6".
Typical applications for the 'BOXER' are photo paper, ink-jet paper, laser labels, laser
sheets, film, foil, design paper, etc. DIN A3 is another possibility.
The boxes are stacked in a hopper-loader of 100 cm (40") height; this corresponds
to over 55 boxes of 18 mm (.7"). At a cycle rate of 5 boxes per minute a hopper is
refilled about each 10 minutes, at 10 cycles/minute reloading is done every 5 minutes.
A hopper is reloaded on the run.
The output in double stream is up to 20 BOXES PER MINUTE (10 cycles per minute).
The empty box is pushed pneumatically from the hopper into the filling station.
In double stream, one box comes from the drive side and the other box from the
operator side. The batches are forwarded step-and-go by swivel fingers to the filling
station. In the filling station the lid is lifted by a suction arm at the ingoing side, the
batch is pushed all the way into the box and the lid is closed.
A pneumatic pusher moves the filled boxes on a 90° table.
Batches can pass the filling station without being boxed, ready for manual take-away
or for in-line wrapping.
A stand alone 'BOXER' can be field converted for in-line operation and be connected
to an Automation-Stacker.
Optional is a vacuum feeder (single or double stream) mounted over the conveyor.
Other in-line operations: labelling, shrink wrapping, overwrapping with tear strip.
NOW AVAILABLE: The BOXER-COMBI, the box filler for both DIN A4 and 10 x 15.
